Lyddemper rensesett, 250ml inkl. Microfiberklut, Fluna Tec

Rengjøring av lyddemper.

FLUNA SILENCER CLEANING SET NO. 4:

SPECIAL CLEANER FOR THE CLEANING OF SILENCERS OF ALL KINDS
Fluna SDR is a special cleaner and degreaser for the automatic cleaning of silencers. Fluna SDR automatically cleans metal surfaces of powder residues and combustion residues.

Properties
Cleans residue-free and degreasing at the same time, automatically
Easy application, very good material compatibility
The set contains the following individual products
Fluna SDR Concentrate 250ml (GCSDR0250)
Microfiber cloth 40/40cm Sleeve for cleaning the silencer
On the backside of the inlet you will find a detailed product description.

APPLICATION
Empty out half of the amount of the attached concentrate bottle into the empty PVC pipe and dilute this concentrate in a ratio of 1:3 with water, which gives 500ml of cleaning solution. The whole concentrate bottle is enough for 1liter cleaning solution, that is 2 applications. If possible, disassemble the silencer and place it in the pipe with the cleaner mixture. Non-disassemblable silencers can be placed as a whole in the cleaner and filled. The exposure time is depending on the degree of contamination from 0.5 to 2 hours. The cleaning is done automatically and can be supported by shaking. A black discoloration of the cleaning solution becomes visible when effective. Accessible areas can be cleaned with the attached microfiber cloth. After the cleaning process, rinse the silencer vigorously with clear water. By shaking and tapping, dirt residues can still dissolve.

Finally, dry the silencer before reassembling it.

Check material compatibility before use!

APPLICATION- and
PRODUCTDATASHEET
Fluna SDR
SILENCER-CLEANING SET
Special Cleaning Set for the cleaning of silencers of all kind.
Fluna SDR is a special cleaner and degreaser for the automatic cleaning of silencers. Fluna SDR automatically
cleans metal surfaces of powdery debris and combustion residues.
Properties :
? Automatically cleans residue-free and degreases at the same time
? Easy to use, good material compatibility
Application :
Empty half of the enclosed concentrate bottle into the empty PVC case and dilute this concentrate in the ratio
1: 3 with water, which gives 500ml cleaning solution. The whole content of the concentrate bottle is sufficient
for 1 liter cleaning solution, that is 2 applications. If possible, dismantle the silencer and place it in the can with
the detergent mixture. Non-dismountable silencers can be placed in the cleaner as a whole, or filled. In this case,
the filling has to be done from the front-side. The back-side must be closed tight by using a silicone- or rubber
plug to avoid that the cleaning mixture leaks out. The exposure time is between 0,5 and 8 hours, depending on
the degree of soiling. Warming up the cleaning mixture up to 40°C increases the cleaning efficiency and redudes
the exposure time. The cleaning takes place automatically and can be supported by shaking. A black / brown
discoloration of the cleaning solution becomes visible when effective.
Silencer BEFORE cleaning
Accessible areas can be cleaned with the enclosed microfibre cloth, such as the inside area oft he tube.
After cleaning, rinse the silencer vigorously with clean water. Shaking and tapping may support to loose dirt.
Finally, dry the silencer before reassembling it. Check material compatibility before use!

PRODUCT-DATAS :

Article Number : Koncentrate-bottle : GCSDR0250
Set IV : GCSDR0SET4

Customs Tariff Number : 34029090
EAN-Code : Koncentrate-bottle : 9120041426759
SET IV : 9120041426766
Product Size : Koncentrate-bottle : 250ml

Packaging : Koncentrate-bottle : 250ml PEHD-bottle with Screw Head
SET IV : PVC-Case DN 65/320mm
Storage : cool and dry, at approx. +5°C to +40°C
Transport / Identification No dangerous good according transport regulations.